AOL1428A 30v n-channel mosfet general description product summary v ds i d (at v gs =10v) 49a r ds(on) (at v gs =10v) < 8m ? r ds(on) (at v gs = 4.5v) < 11.5m ? symbol v ds v gs i dm i as , i ar e as , e ar t j , t stg symbol t 10s steady-state steady-state r jc 160 pulsed drain current c continuous drain current g parameter typ max t c =25c 2.1 46 t c =100c junction and storage temperature range -55 to 175 c thermal characteristics units maximum junction-to-ambient a c/w r ja 18.5 45 25 v 20 gate-source voltage drain-source voltage 30 the AOL1428A combines advanced trench mosfet technology with a low resistance package to provide extremely low r ds(on) . this device is suitable for use as a high side switch in smps and general purpose applications. v maximum units parameter absolute maximum ratings t a =25c unless otherwise noted 30v avalanche energy l=0.1mh c mj avalanche current c 9.7 continuous drain current 45 12.4 a 30 a t a =25c i dsm a t a =70c i d 49 38 t c =25c t c =100c power dissipation b p d w power dissipation a p dsm w t a =70c 93 1.3 t a =25c maximum junction-to-case c/w c/w maximum junction-to-ambient a d 1.3 60 1.6 g d s ultraso-8 tm top view bottom view g d s g s rev 0: july 2009 www.aosmd.com page 1 of 6
AOL1428A symbol min typ max units bv dss 30 v v ds =30v, v gs =0v 1 t j =55c 5 i gss 100 na v gs(th) gate threshold voltage 1.5 2 2.6 v i d(on) 160 a 6.2 8 t j =125c 9.7 12.5 8.7 11.5 m ? ? q g (10v) 14 18 22 nc q g (4.5v) 6.4 8 9.6 nc q gs 2.7 3.4 4.1 nc q gd 1.8 3 4.2 nc t d(on) 6ns t r 3ns t d(off) 21 ns t f 3ns t rr 7 8.5 10 ns q rr 10 13 16 nc components in life support devices or systems are not authorized. aos does not assume any liability arising out of such applications or uses of its products. aos reserves the right to improve product design, functions and reliability without notice. body diode reverse recovery charge i f =12.4a, di/dt=500a/ms maximum body-diode continuous current input capacitance output capacitance turn-on delaytime dynamic parameters turn-on rise time turn-off delaytime v gs =10v, v ds =15v, r l =1.1 ? , r gen =3 ? gate resistance v gs =0v, v ds =0v, f=1mhz turn-off fall time total gate charge v gs =10v, v ds =15v, i d =12.4a gate source charge gate drain charge total gate charge m ? i s =1a,v gs =0v v ds =5v, i d =12.4a v gs =4.5v, i d =12.4a forward transconductance diode forward voltage r ds(on) static drain-source on-resistance i dss a v ds =v gs i d =250 a v ds =0v, v gs = 20v zero gate voltage drain current gate-body leakage current electrical characteristics (t j =25c unless otherwise noted) static parameters parameter conditions body diode reverse recovery time drain-source breakdown voltage on state drain current i d =250 a, v gs =0v v gs =10v, v ds =5v v gs =10v, i d =12.4a reverse transfer capacitance i f =12.4a, di/dt=500a/ms v gs =0v, v ds =15v, f=1mhz switching parameters a. the value of r ja is measured with the device mounted on 1in 2 fr-4 board with 2oz. copper, in a still air environment with t a =25c. the power dissipation p dsm is based on r ja and the maximum allowed junction temperature of 150c. the value in any given application depends on the user's specific board design, and the maximum temperature of 175c may be used if the pcb allows it. b. the power dissipation p d is based on t j(max) =175c, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation limit for cases where additional heatsinking is used. c. repetitive rating, pulse width limited by junction temperature t j(max) =175c. ratings are based on low frequency and duty cycles to keep initial t j =25c. d. the r ja is the sum of the thermal impedence from junction to case r jc and case to ambient. e. the static characteristics in figures 1 to 6 are obtained using <300 s pulses, duty cycle 0.5% max. f. these curves are based on the junction-to-case thermal impedence which is measured with the device mounted to a large heatsi nk, assuming a maximum junction temperature of t j(max) =175c. the soa curve provides a single pulse rating. g. the maximum current rating is package limited. h. these tests are performed with the device mounted on 1 in 2 fr-4 board with 2oz. copper, in a still air environment with t a =25c. rev 0: july 2009 www.aosmd.com page 2 of 6
AOL1428A typical electrical and thermal characteristic s 17 5 2 10 0 18 40 0 20 40 60 80 100 120 02468 v gs (volts) figure 2: transfer characteristics (note e) i d (a) 2 4 6 8 10 12 0 5 10 15 20 25 30 i d (a) figure 3: on-resistance vs. drain current and gate voltage (note e) r ds(on) (m ? ) 1.0e-05 1.0e-04 1.0e-03 1.0e-02 1.0e-01 1.0e+00 1.0e+01 1.0e+02 0.0 0.2 0.4 0.6 0.8 1.0 1.2 v sd (volts) figure 6: body-diode characteristics (note e) i s (a) 25c 125c 0.8 1 1.2 1.4 1.6 1.8 2 0 25 50 75 100 125 150 175 200 temperature (c) figure 4: on-resistance vs. junction temperature (note e) normalized on-resistance v gs =4.5v i d =12.4a v gs =10v i d =12.4a 0 5 10 15 20 25 246810 v gs (volts) figure 5: on-resistance vs. gate-source voltage (note e) r ds(on) (m ? ) 25c 125c v ds =5v v gs =4.5v v gs =10v i d =12.4a 25c 125c 0 30 60 90 120 150 012345 v ds (volts) fig 1: on-region characteristics (note e) i d (a) v gs =3v 3.5v 6v 7v 10v 4.5v 4v rev 0: july 2009 www.aosmd.com page 3 of 6
AOL1428A typical electrical and thermal characteristic s 17 5 2 10 0 18 40 0 2 4 6 8 10 0 5 10 15 20 q g (nc) figure 7: gate-charge characteristics v gs (volts) 0 200 400 600 800 1000 1200 1400 1600 0 5 10 15 20 25 30 v ds (volts) figure 8: capacitance characteristics capacitance (pf) c iss 0 100 200 300 400 500 600 0.0001 0.001 0.01 0.1 1 10 pulse width (s) figure 10: single pulse power rating junction-to- case (note f) power (w) 0.01 0.1 1 10 0.00001 0.0001 0.001 0.01 0.1 1 10 100 pulse width (s) figure 11: normalized maximum transient thermal impedance (note f) z jc normalized transient thermal resistance c oss c rss v ds =15v i d =12.4a single pulse d=t on /t t j,pk =t c +p dm .z jc .r jc t on t p d in descending order d=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse t j(max) =175c t c =25c 10 v ds (volts) i d (amps) figure 9: maximum forward biased safe operating area (note f) 10 jc =1.6c/w rev 0: july 2009 www.aosmd.com page 4 of 6
AOL1428A typical electrical and thermal characteristic s 17 5 2 10 0 18 40 0.001 0.01 0.1 1 10 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 pulse width (s) figure 16: normalized maximum transient thermal impedance (note h) z ja normalized transient thermal resistance single pulse d=t on /t t j,pk =t a +p dm .z ja .r ja t on t p d in descending order d=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 0 20 40 60 80 100 0 25 50 75 100 125 150 t case (c) figure 13: power de-rating (note f) power dissipation (w) 0 10 20 30 40 50 60 0 25 50 75 100 125 150 175 t case (c) figure 14: current de-rating (note f) current rating i d (a) 1 10 100 1000 10000 0.00001 0.001 0.1 10 1000 pulse width (s) figure 15: single pulse power rating junction-to- ambient (note h) power (w) t a =25c r ja =60c/w 1.0 10.0 100.0 1 10 100 1000 time in avalanche, t a ( s) figure 12: single pulse avalanche capability (note c) i ar (a) peak avalanche current t a =25c t a =150c t a =100c t a =125c rev 0: july 2009 www.aosmd.com page 5 of 6
AOL1428A - + vdc ig vds dut - + vdc vgs vgs 10v qg qgs qgd charge gate charge test circuit & waveform - + vdc dut vdd vgs vds vgs rl rg vgs vds 10% 90% resistive switching test circuit & waveforms tt r d(on) t on t d(off) t f t off vdd vgs id vgs rg dut - + vdc l vgs vds id vgs bv i unclamped inductive switching (uis) test circuit & waveforms ig vgs - + vdc dut l vds vgs vds isd isd diode recovery test circuit & waveforms vds - vds + i f ar dss 2 e = 1/2 li di/dt i rm rr vdd vdd q = - idt ar ar t rr rev 0: july 2009 www.aosmd.com page 6 of 6
|
